Page 87
d) Install Spacer Throttle body on Inlet Duct. Use 1 Bolt M8x25mm for the RH
side at the bottom of the assembly and 3 Bolts M8x30mm for the other holes.
Use 2 Acorn Nuts with 2 lock washers: 1 at the RH upper position, and 1 at the
LH bottom position. NOTE: Assemble the Accelerator/Cruise Cable Bracket
with Cables on Inlet Duct at the same time as Spacer Throttle Body.
M8x30 mm Bolt,
Acorn nut and
Lock Washer
M8x30 mm Bolt,
Acorn nut and
Lock Washer
Commentaires sur ces manuels