Mercury OWC Elite Pro Manuel d'utilisateur télécharger pdf (Page 7)

OWC MERCURY ELITE PRO

SYSTEM SETUP

4. Install the hard drive, as shown below. Slide the SATA connector on the hard drive into the

black SATA connector inside the Mercury Elite Pro. You may need to move the blue and

black LED cables to the side to make room for the hard drive. Make sure the drive is ﬁrmly

seated before proceeding.

5. Using the four screws from the packet you removed from the inner chassis, fasten the

hard drives into the inner chassis. There are two screw holes on each side of the inner

chassis, as circled below in red.

1 2 3 4 5 6 7 8 9 10 11 12

Pas de commentaire

Mercury OWC Elite Pro Manuel d'utilisateur Page 7