Mercury 200 Optimax Spécifications télécharger pdf (Page 141)

OUTBOARD INSTALLATION

eng 129

3. Adjust the cable barrel so the installed throttle cable will hold

the idle stop screw against the stop.

a - Barrel sleeve

b - Cable barrel

c - Idle stop screw

4. Check the throttle cable adjustment as follows:

a. Shift the outboard into gear a few times to activate the

throttle linkage. Rotate the propeller shaft while shifting

into reverse.

b. Return the remote control to neutral.

c. Place a thin piece of paper between the idle adjustment

screw and the idle stop. The adjustment is correct when

the paper can be removed without tearing, but has some

drag on it.

IMPORTANT: The idle stop screw must be touching the stop.

a - Idle stop screw

b - Idle stop

d. Adjust the cable barrel if necessary.

28751

2680

1 2 ... 136 137 138 139 140 141 142 143 144 145 146 147 148 149

Pas de commentaire

Mercury 200 Optimax Spécifications Page 141