Mercury 200 Optimax Spécifications télécharger pdf (Page 146)

OUTBOARD INSTALLATION

134 eng

d. Turn the ignition key switch to the "ON" position for three

seconds. This operates the electric fuel pump.

26846

e. Turn the ignition key switch back to the "OFF" position,

and squeeze the primer bulb again until it feels firm.

f. Turn the ignition key switch to the "ON" position again for

three seconds.

g. Continue this procedure until the fuel primer bulb stays

firm.

2. Turn the ignition key switch to the "ON" position.

3. Within the first 10 seconds after the key switch has been

turned on, move the remote control handle from neutral into

forward. This will automatically start the priming process.

PURGING AIR FROM THE ENGINE OIL TANK

1. Loosen the fill cap on the engine oil tank.

2. Start the engine.

3. Operate the engine until all the air has vented out and oil

starts to flow out of the tank.

4. Tighten fill cap.

1 2 ... 141 142 143 144 145 146 147 148 149

Pas de commentaire

Mercury 200 Optimax Spécifications Page 146