Mercury ALPHA Spécifications télécharger pdf (Page 22)

CC942

General Information

Lanyard Stop Switch

The purpose of a lanyard stop switch (1) is to turn off the engine when

the operator moves far enough away from the operator’s position (as

in accidental ejection from the operator’s position) to activate the

switch. Some remote control units are equipped with a lanyard stop

switch. A lanyard stop switch can be installed on the dashboard or

side adjacent to the operator’s position.

The lanyard is a cord usually between 4 and 5 feet (1220 and 1524

mm) in length when stretched out with an element on one end made

to be inserted into the switch and a snap (2) on the other end for

attaching to the operator. The lanyard is coiled to make its at-rest

condition as short as possible so as to minimize the likelihood of

lanyard entanglement with nearby objects. It is made as long as it is

in its stretched condition to minimize the likelihood of accidental

activation should the operator choose to move around in an area

close to the normal operator’s position. If it is desired to have a

shorter lanyard, wrap the lanyard around the operator’s wrist or leg,

or tie a knot in the lanyard.

INDEX

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 180 181

Pas de commentaire

Mercury ALPHA Spécifications Page 22