Mercury 200 Optimax Manuel d'installation télécharger pdf (Page 17)

200/225/250 OPTIMAX

Page 17 of 38

c. Shift remote control into reverse while turning propeller. The propshaft should lock

solidly in gear. If not, adjust barrel away from cable end guide. Repeat steps a thru

d. Return remote control handle to neutral. The propeller should turn freely without

drag. If not, adjust barrel closer to cable end guide. Repeat steps a thru d.

Throttle Cable Installation

1. Position remote control into neutral.

2. Attach throttle cable to the throttle lever. Secure with washer and locknut.

a-Nylon Washer

b-Locknut – Tighten locknut then back off locknut 1/4 turn

3. Adjust the cable barrel so that the installed throttle cable will hold the idle stop screw

against the stop.

a-Cable Barrel – Adjust To Hold Idle Stop Screw Against Stop

b-Idle Stop Screw

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 37 38

Pas de commentaire

Mercury 200 Optimax Manuel d'installation Page 17