Mercury 200 Optimax Manuel d'installation télécharger pdf (Page 26)

200/225/250 OPTIMAX

Page 26 of 38

Paddle Wheel Speed Sensor Installation (If Equipped)

INSTALLING AND REMOVING THE PADDLE WHEEL

Installation – slide the pins into the slots in the bracket and snap the tabs into place.

Removal – squeeze open (unlock) the tabs and pull up on the paddle wheel.

a-Pins

b-Tabs

WIRE CONNECTIONS

IMPORTANT: Before making wire connections, make sure wires are routed through

the transom.

NOTE: Wires can only be pushed into the connector one way. Align the wire terminal with

the tabs inside the connector.

1. Have the wiring routed through the transom.

2. Push each wire terminal into its respective location in the connector. Push wires in until

they snap into place.

3. Secure wires into connector with the wire retainer.

WHITE

YELLOW

BLACK

BLUE

a-Connector

b-Wire Retainer

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 37 38

Pas de commentaire

Mercury 200 Optimax Manuel d'installation Page 26