Mercury 200 Optimax Manuel d'installation télécharger pdf (Page 8)

200/225/250 OPTIMAX

Page 8 of 38

Electrical, Hoses, and Control Cables

IMPORTANT: Warning Horn Requirement – The remote control or key switch assem-

bly must be wired with a warning horn. This warning horn is used with the engine

warning system.

Front Clamp Assembly

REMOVAL

Remove two screws with retainer and open the front clamp.

57803

a-Screws (2)

b-Retainer

c-Clamp

INSTALLATION

IMPORTANT: Sufficient slack must exist in engine wiring harness, battery cables,

fuel hose, and oil hoses routed between clamp and engine attachment point, to re-

lieve stress and prevent hoses from being kinked or pinched.

1. Place the neoprene wrap around the wiring, hoses, and control cables as shown.

57840

2. Secure both halves of clamp with sta-strap.

57802

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 37 38

Pas de commentaire

Mercury 200 Optimax Manuel d'installation Page 8